国产 欧美 三级 卡通 综合

  • <big id="yt2mq"></big>
  • <center id="yt2mq"><em id="yt2mq"></em></center>
  • <object id="yt2mq"><option id="yt2mq"></option></object>

    1. <object id="yt2mq"></object>
      中文版 | русский язык
      Products
      Powder Metallurgy Sintering Furnace
      Ammonia Dissociator
      Exothermic Gas Generator Parameters
      Car Bottom Furnace
      Aluminum Brazing Furnace
      Electrically Heated High Temperature Brazing Furnace
      Gas-Electric Hybrid Aluminum Brazing Furnace
      Contact us
      AAddress:NO.3 Guangda Road, Western Section of Fengdong New Town, Qindu District, Xianyang, Shaanxi, China.Block C
      Tel:029-33187560  
          33187561
      Fax:029-33187564 33187568  
      Mailbox:aojie@www.stilettosbricks.com  
       
      Production site Production site

      1. Production site and testing, vigorous production site and orderly processing site


      2. In order to ensure the levelness and straightness of the equipment, all the equipment of our company is made on the steel reference platform, which can guarantee the levelness and straightness of the whole production line ±0.2mm and ±0.2mm respectively

      C. Integral test method -- put the blocked muff into the pool as a whole and pressurize it to 0.3mpa. Test the leakage as a whole and hold the pressure for 0.5 hours to prevent possible leakage in other positions except welding seam

      3. Rigorous detection methods

      For the whole system, the air tightness leak inspection of muffle must be strictly carried out at the manufacturing site before delivery. The leak detection method used is one or more of the following combination of simultaneous use, or even all use, until the customer approves the result.

      Bubble detection method → color penetration method → whole test method → helium leak test method



      A. Bubble detection method -- inject compressed air into the sealed muffin, brush glass water at the welding seam for observation and pressure maintenance;


      B. Dye penetration method -- clean the weld as the inspection side, coat it with whitewash powder, and coat the back side of the weld with kerosene with high permeability after being dried, so that the surface is sufficiently infiltrated and penetrates for half an hour, depending on whether the place coated with whitewash powder has any oil stains. No oil stain is qualified, when there is oil stain should be further identified infiltration channels and treatment.

      D. Helium leak detection method -- helium gas with a concentration of over 10% is injected into the sealed muffin and detected by Agilent (phd-4) helium leak detector



       
      Xi'an Aojie electric heating equipment engineering Co., Ltd. (www.www.stilettosbricks.com)2003-2009 All Right Resverved
      Address:NO.3 Guangda Road, Western Section of Fengdong New Town, Qindu District, Xianyang, Shaanxi, China. Zip Code:712044 Shaanxi ICP:05014919
      Tel:029-33187560 33187561 33187562 33187563   Phone:18691954955 13609110778
      Fax:029-33187564 33187568  Mailbox:aojie@www.stilettosbricks.com
      国产 欧美 三级 卡通 综合
    2. <big id="yt2mq"></big>
    3. <center id="yt2mq"><em id="yt2mq"></em></center>
    4. <object id="yt2mq"><option id="yt2mq"></option></object>

      1. <object id="yt2mq"></object>